About MT1

Cleaning mode                 Cleaning area (sq.ft/h)           

  0.3 m/s                                    3,767 - 5,382    

  0.4 m/s                                    5,382 - 7,101    

  0.5 m/s                                    6,564 - 8,819    

  0.6 m/s                                    7,972 - 10,225    

  0.7 m/s                                    9,149 - 11,842    

  0.8 m/s                                    10,764 - 13,564    

  0.9 m/s                                    11,842 - 13,993    

  1.0 m/s                                    12,917 - 16,684    

Cleaning mode     Gear level      0.3m/s       0.4m/s         0.5m/s           0.6m/s           0.7m/s      0.8m/s 0.9m/s 1.0m/s

Sweeping                  High                  18,299 （sq.ft）         24,757                    2300 30,139 

                                                                1700（m2）              2300

Sweeping                Medium    

Sweeping                  Low    

1. Adjustable trash height: 0-3.94 inches (0-10 cm). Default trash length + width: 11.81 inches (30 cm), maximum support: 17.72 inches (45 cm).
2. 100% sweeping able trash size: Length 8.66 inches (22 cm), width 2.56 inches (6.5 cm), height 2.56 inches (6.5 cm) equivalent to a 500mL water bottle.
3. This size is better than a conventional hand-push sweeping device of the same size
4. Max single trash weight: 1.1 lbs. (500g).

Operating State            Max Barrier Height            Max Ravine Width          Max Climbable Slope

Non-Clean Operation       0.79 in (20 mm)                1.18 in (30 mm)                         8°  

Cleaning operation           0.79 in (20 mm)                1.18 in (30 mm)                         8°

Operating State                        Minimum passing width                   Minimum turnaround width

Cleaning operation                        29.5 in (750 mm)                                 43.3 in (1100 mm)

Cleaning mode                           gear level                        Suction                                  note

                                                          Max                               400Pa             MT1 adopts a high-flow fan,

                                                        General                           100Pa             not a negative pressure fan.

Lidar scanning feature height: 19.09 in, 48.5cm

Minimum passing height: 20.47 in, 52cm

Filtration class F9;

01 Support water washing 3 times, when cleaning, please do not use sharp objects or tools to brush the filter, only to the water rinse, to avoid the filter is poked and broken.

02 Do not use any detergent when washing in water, use only water to avoid damage to the filter;

03 Whether it is washed, damp or wet, please be sure to dry it fully (prohibit the use of hair dryer hot air drying) before loading the whole machine for use, otherwise the dust will be more likely to adhere to the filter.

Note: After being washed/moisturized/wetted many times, the dust reduction effect and service life of the filter will be

affected to some extent